Инсулиновые шприцы 1 мл 31G
Стерильные инсулиновые шприцы 1 мл с иглой 31G x 6 мм. Индивидуальная упаковка, без латекса, пирогенов и ПВХ, с контрастной чёрной шкалой 0,01 мл.
9,99 €
10 pcs
Способы оплаты
31G x 6 mm insulin needle
Ultra-fine 31-gauge cannula at 6 mm length. The standard format for subcutaneous research injections, designed for low-volume aqueous solutions.
Sterile, single-use, individually wrapped
Each syringe sealed in its own blister. Sterilized by ethylene oxide and intact until the moment of use.
Latex-free, pyrogen-free, PVC-free
Materials are tested for the absence of latex, pyrogens, and PVC plasticizers, so trace contaminants do not reach the dosed sample.
Lubricated synthetic plunger
Silicone-coated rubber plunger glides smoothly through the barrel for accurate small-volume aspiration without sticking.
Black graduated 0.01 mL scale
High-contrast black markings every 0.01 mL on a clear barrel make low-dose reconstitution research more readable than the typical orange-printed scale.
Research uses
What this is
A 1 mL insulin syringe with an integrated 31-gauge by 6 mm needle. The 31G cannula is one of the thinnest options available without dropping into specialist tuberculin formats, which makes it the working format for subcutaneous research injections of low-volume aqueous solutions, including reconstituted lyophilized peptides.
Why these specifications
The 6 mm length sits in the subcutaneous compartment without crossing into muscle in most body sites. The 31-gauge bore narrows resistance during slow withdrawals, which matters when aspirating viscous or sticky solutions. The lubricated synthetic plunger keeps the seal smooth without silicone-oil bleed into the sample. Pyrogen-free and latex-free certifications close the obvious contamination paths for in-vitro and laboratory work.
How to use
Open the blister at the plunger end. Draw bacteriostatic water or the reconstituted solution into the barrel by inverting the source vial and pulling the plunger to the chosen volume. Tap to displace air bubbles, then expel the small headspace before measuring. Single-use only - dispose of the syringe in a sharps container after each draw.
Compatibility
Used routinely as the aspiration tool for lyophilized peptides reconstituted with bacteriostatic water. The 1 mL barrel covers the dosing range of typical research peptides without the dead-volume losses of larger syringes.
Standard solvent for lyophilized peptides
Стерильная вода фармакопейного качества с 0,9% бензилового спирта - стандартный растворитель для восстановления лиофилизированных пептидов. Незаменимый аксессуар. Каждый флакон герметично запечатан и готов к использованию.
Surface and vial-top disinfection pads
Стерильные спиртовые салфетки в индивидуальной упаковке с 70% изопропилом. Развёрнутая поверхность 30 x 65 мм для дезинфекции пробок флаконов, поверхностей и кожи.
Bundle of syringes and alcohol pads at the same count
Набор инсулиновых шприцев 1 мл 31G x 6 мм и спиртовых салфеток 70% ИПА в равном количестве. Одна салфетка на шприц, цена за штуку ниже, чем при раздельной покупке.
Documentation
Material specification
Barrel volume
Needle gauge
Needle length
Graduation
Sterility
Materials
Packaging
Storage
Reference standards
Manufactured to ISO 7886-1 (single-use sterile hypodermic syringes) and ISO 9626 (stainless-steel cannulae for medical devices). Sterility validated to ISO 11135 for ethylene oxide processing. CE-marked product.
Research use only
Sold strictly for in-vitro research, laboratory liquid handling, and educational use. Not intended for human or animal injection. Dispose of used syringes in a compliant sharps container.
