Graduated Measuring Syringe 1 mL 31G x 6 mm
Sterile 1 mL graduated laboratory syringe with a 31G x 6 mm fine tip. Individually wrapped, latex-free, pyrogen-free, PVC-free, with a high-contrast 0.01 mL black scale for precise liquid measuring and transfer.
€9.99
Payment Methods
31G x 6 mm fine tip
Ultra-fine 31-gauge cannula at 6 mm length. A precise format for measuring and transferring low-volume aqueous solutions in the lab.
Sterile, single-use, individually wrapped
Each syringe sealed in its own blister. Sterilized by ethylene oxide and intact until the moment of use.
Latex-free, pyrogen-free, PVC-free
Materials are tested for the absence of latex, pyrogens, and PVC plasticizers, so trace contaminants do not reach the handled sample.
Lubricated synthetic plunger
Silicone-coated rubber plunger glides smoothly through the barrel for accurate small-volume measuring without sticking.
Black graduated 0.01 mL scale
High-contrast black markings every 0.01 mL on a clear barrel make low-volume measuring and reconstitution research more readable than the typical orange-printed scale.
Research uses
What this is
A 1 mL graduated measuring syringe with an integrated 31-gauge by 6 mm fine tip. The 31G cannula is one of the thinnest options available without dropping into specialist formats, which makes it a precise working tool for measuring and transferring low-volume aqueous solutions, including reconstituted lyophilized peptides.
Why these specifications
The 6 mm fine tip reaches into small vials and containers with minimal dead space. The 31-gauge bore narrows resistance during slow withdrawals, which matters when drawing up viscous or sticky solutions. The lubricated synthetic plunger keeps the seal smooth without silicone-oil bleed into the sample. Pyrogen-free and latex-free certifications close the obvious contamination paths for in-vitro and laboratory work.
How to use
Open the blister at the plunger end. Draw bacteriostatic water or the reconstituted solution into the barrel by inverting the source vial and pulling the plunger to the chosen volume. Tap to displace air bubbles, then expel the small headspace before measuring. Single-use only: discard the syringe after each measuring or transfer task.
Compatibility
Used routinely as the measuring and transfer tool for lyophilized peptides reconstituted with bacteriostatic water. The 1 mL barrel covers the dosing range of typical research samples without the dead-volume losses of larger syringes.
Standard solvent for lyophilized peptides
USP-grade sterile water with 0.9% benzyl alcohol - the standard solvent for reconstituting lyophilized peptides. Essential accessory for any peptide research. Each vial is sealed and ready to use.
Surface and vial-top disinfection pads
Sterile, individually sealed alcohol pads with 70% isopropyl. 30 x 65 mm folded surface for vial-top, hard-surface, and skin disinfection in research workflows.
Bundle of syringes and alcohol pads at the same count
Bundle of 1 mL 31G x 6 mm graduated lab measuring syringes and 70% IPA alcohol prep wipes in matched counts. One wipe per syringe, lower per-unit cost than buying separately.
Documentation
Material specification
Barrel volume
Needle gauge
Needle length
Graduation
Sterility
Materials
Packaging
Storage
Reference standards
Manufactured to ISO 7886-1 (single-use sterile syringes) and ISO 9626 (stainless-steel cannulae). Sterility validated to ISO 11135 for ethylene oxide processing. CE-marked product.
Research use only
Sold strictly as a multi-purpose laboratory tool for in-vitro research, precise liquid measuring and transfer, laboratory liquid handling, and educational use. Not intended for human or animal use.